How To Measure Your Tower For A Cargo Rack Bimini

Please measure your wakeboard tower following these simple instructions to determine what size of Cargo Rack Bimini you need.

1) The frame of the Cargo Rack Bimini mounts between the legs of the tower. Determine which is narrower, the space between the two rear legs on your tower or the space between the two front legs. The narrower of the two will determine the width of the bimini that will fit between them.

2)Take the following measurement between the legs that have the narrower space. The distances measured need not be exact.





a)If you have accessories such as speakers hanging from the top of the tower, measure the inside width of the tower 4" to 6" below those accessories as shown below. How far down you measure impacts the available headroom and clearance for wakeboards or inflatable tubes stored on top of the bimini tip.

b)If you have no hanging accessories, measure the inside width 5" to 10" from the bottom of the top section of the tower. How far down you measure impacts the available head room and clearance for wakeboards or inflatables.

Once you have this width measurement, you can determine the bimini size that you need.
If you measured between 53" and 65" your bimini size is: SMALL. If you measured between 65" - 77" your bimini size is MEDIUM.

If your measurement is a little less than 65", then it may be better to get the medium bimini and mount it a little farther down the legs. However, this will reduce headroom. Although headroom is essential, some headroom can be scarified for the additional shade of a wider bimini. The width of the bimini canvas is close to the lower end of each measurement range. The remainder of the width is compensated by telescoping members that do not provide shade coverage for the gap between the tower and bimini.

Should you have any other questions about measuring for your Cargo Bimini Rack, please call us at: (305) 438-9464