JL Audio 6.5 inch Cockpit Coaxial System
M650-CCX-SG-WH
M-Series Narrow Flange 6.5-inch Marine Cockpit Coaxial System for Infinite-Baffle Use (75 W, 4 �) - White Classic Grille
Purpose-engineered and built for real marine duty, M-Series coaxial systems deliver maximum audio performance in any open-air boating environment.
This special, narrow-flange, 6.5-inch coaxial speaker fits in spaces where a conventional marine 6.5-inch speaker will not. It features an outer frame
diameter of only 6.55 in. (166 mm), yet still maintains the same cone area as conventional, wide-flange designs. (If you need a standard, wide-flange marine
6.5-inch coaxial, select the MX650-CCX, instead.)
The long excursion woofer design and excellent power handling make your music come through loud
and clear at speed, or at anchor. The woofer design is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 57 l). Operating this
coaxial system in less space will compromise its low frequency performance.
A 1-inch pure silk dome tweeter, specially treated to withstand the marine
environment, handles the high-frequency duties. Silk has been chosen for its lightness, excellent damping properties and smooth response characteristics.
You will appreciate the clean, articulate high-frequency response of the M-Series dome tweeter, especially at higher volume levels.
A true 2-way passive crossover network is sealed in a protective capsule and mounted to the woofer's frame so that it does not require additional
mounting provisions.
Although M650-CCX Coaxial Systems can be used with as little as 25 W per channel, for best audio performance we recommend
amplifiers capable of between 75-150 W of continuous power per channel.
Sold as a pair.
General Specifications
- Continuous Power Handling (RMS)
75 W
- Peak Music Power
225 W
- Recommended Amplifier Power (RMS)
25 - 150 W / Ch.
- System Efficiency
89.5 dB @ 1 W / 1 m
- System Nominal Impedance
4
�
- System Frequency Response
55 Hz - 25 KHz � 3 dB
Coaxial Physical Specifications
- Frame Outer Diameter (A)
6.55 in / 166 mm
- Bolt Hole Circle Diameter (B)
5.79 in / 147 mm
- Motor Outer Diameter (C)
3.75 in / 95 mm
- Frontal Grille Protrusion* (D)
0.91 in / 23 mm
- Mounting Hole Diameter (E)
5.00 - 5.25 in / 127 - 133 mm
- Mounting Depth (F)
2.95 in / 75 mm